Model Samples

Up


Home


Model 4820-6 Sample

 

The following pictures were made while staging/preparing a 6-position (20 feet) unit for shipment to Kansas City, MO, for installation as a buried unit.  This unit is our standard pit-blind product, with the exceptions of hinged seat covers, and an off-season closure/lockdown cap that was requested by the customer.  Other designs utilize this Model 4820-6 unit (less closure/lockdown cap and hinged seat covers) as a baseline.  It is shown without camouflage and roof (in some views), which are stored for shipment.

Garage door tracks are used to provide a stable support assembly for the sliding roof/door assemblies. The roof/door assemblies utilize steel-channel stiffener supports to improve sag resistance.

This design shows hinged seat covers/lids.  The standard product is provided with a seat cover/lid design that is a removable cap that slips down over the seat body.  The hinged lid provides convenience, but the cap design is more stable and durable.  The hinged seat cover/lid is by special order.

The anchoring system will be determined upon placement of order.  It is determined by customer, based upon place and method of installation desired.

DkHutProd6-020521.jpg (85023 bytes)

Before you view our pit blind for the hunter,  please note that we didn't forget man's best friend and valuable hunting companion.  He/she should be well protected and ready for action in the Doggy Bunk.  The Doggy Bunk is available for order as a separate accessory.

DkHutProd1-020521.jpg (79510 bytes)

Unit is shown here less the camouflage.
They are stored in the unit for shipment.  Note
the closed mats on the side, the sliding roof/
door, and the anchoring system on the end.

DkHutProd2-020521.jpg (68377 bytes)

View of the seating with hinged seat covers/lids and the flat walkway which is welded to the sides.  The seats are also welded to the walkway and the side of the blind.

DkHutProd3-020521.jpg (1070785 bytes)

Ready for shipment.

DkHutProd4-020521.jpg (80875 bytes)

DkHutProd5-020521.bmp (539278 bytes)

View showing the off-season closure/ lockdown cap.  This is a special order modification.  The standard product does not have this cap or the curb that is required for fitting to the curved surface of the blind body.

DkHutProd7-020521.jpg (80781 bytes)

Interior view with the sliding roof/door removed.

DkHutProd8-020521.jpg (73211 bytes)

Interior view showing shelves and seating.

DkHutProd9-020521.jpg (72133 bytes)

View showing the curb welded around the entrance opening for attachment of the off-season closure/lockdown cap.  The standard product does not have either of these features.

DkHutProd6-020521.jpg (85023 bytes)

Remember that we didn't forget man's best friend and valuable hunting companion.  He/she should be well protected and ready for action in the above Doggy Bunk, which is available for order as a separate accessory.

 

Top